See it work

The interactive piece from the front page, with room to try it, followed by CAN-to-USB’s logo, colors and type.

Title: Gallery
Dwg no.: Q5-GAL
Rev: 2026.1
Part of: CAN-to-USB

Planned · the adapter block by block, and how far a frame gets today

Firmware in the platform
In the schematic
Not started

U1 · STM32G473CB Firmware in the platform

FDCAN1 on PB8/PB9, FDCAN2 on PB5/PB13, FDCAN3 on PA8/PA15. The platform’s g4-can2usb example opens FDCAN1 at 500 kbit/s with an 87.5% sample point, on a 170 MHz clock (HSI16 / 4 × 85 / 2), and counts what it receives. FDCAN2 and FDCAN3 have no firmware yet.

can_frames_rx: 0
can_bytes_rx: 0

Schematic: Under way, 57 parts placed
Board layout: Not started. CAN2USB.kicad_pcb is empty.
Firmware here: Still the platform’s starter template

The planned adapter, drawn from its KiCad schematic. Tap a block for details. The counters are the ones the platform’s example firmware keeps; the frame you send is an illustration in your browser, because there’s no can2usb board to run anything on yet.

Assets

Logo, colors, and type.

Mark

The project’s generated logo mark. The grid gets finer with the commit count, and the cells show the split between languages. It’s redrawn as the project grows.

Palette

The colors CAN-to-USB uses across this site: one hue from its discipline’s band, plus the shades that make it work on both dark and light backgrounds.

CAN-to-USB Embedded & hardware DM SANS · NEWSREADER · DM MONO

Type

The two typefaces on the site: a sans-serif for the interface and a serif for headlines.

Build on CAN-to-USB

Ask about licensing the platform, bringing up a board, or contract firmware work.

Email dmoore@dwmmholdings.com How it works